Product Description
- Comes with a resistor board with 1KΩ resistor, 120Ω resistor, 100Ω resistor, 5.8KΩ resistor.
- OBDSTAR DC706/ X300 Classic G3 needs to add 120ohm resistor when clone some ECUs, with this adapter, you don't need to buy additional resistors or disassemble them.
GODIAG ECU GPT Boot AD programming Adapter
GODIAG ECU GPT Boot AD programming adapter comes with a resistor board with 1KΩ resistor, 120Ω resistor, 100Ω resistor, 5.8KΩ resistor.
OBDSTAR DC706/X300 Classic G3 needs to add 120Ω resistor when clone some ECUs, with this adapter, you don't need to buy additional resistors or disassemble them.
GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
Product Features:
1. ECU dedicated connection terminal.
2. Support manual ignition power control
3. The ECU interface cable is labeled
4. Support ECU conversion to OBD2 mode to read and write data
5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
6. Support PCMFlash automatic control of ignition power supply
7. Support ECU opening BOOT method to read and write data
8. CANbus is equipped with a switch to freely select the 120Ω resistor
9. Support GPT to read and write data without disassembling the ECU.
10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]
Product Functions:
Diagnostic function supports standard OBD2 protocol equipment.
Supports ECU reading and writing data, and supports J2534 devices.
Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 71.
Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,
Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.
Connection Method of GODIAG ECU GPT Boot AD programming adapter, J2534 device and PCMFlash dongle software.
J2534 device
|
connection method |
PCMFlash dongle software |
advantages |
 |
 |
 |
easy, convenient and save money |

|


|
 |
Convenient to observe communication status, current and voltage and other working status |
Product Comparison:
Items |
 |
 |
 |
 |
GPT |
√ |
√ |
√ |
√ |
BOOT |
√ |
√ |
√ |
√ |
CNF1 |
√ |
X |
X |
X |
Compatible with J2534 devices |
√ |
√ |
X |
X |
BOOT resistance board |
√ |
X |
X |
X |
Dedicated ECU terminal |
√ |
X |
X |
X |
Power ignition manual /automatic switch |
√ |
√ |
X |
X |
CANbus freely select the 120Ω |
√ |
Fixed 120Ω |
X |
Fixed 120Ω |
5V 3.3V GND CNF1 |
√ |
X |
X |
X |
Package Includes:
1pc x GODIAG ECU GPT Boot AD Programming Adapter
1pc x OBD2 to DB25 Cable
8pcs x Soft Silicone Wires
Shipping and delivery Attention:Flat airmail: 7-18 working days for delivery. To South American and African countries it may take 20-25 working days.
DHL: 7-9 working days for delivery. We usually declare a lower value on a DHL invoice to help with customs clearance. If the address belongs to a remote area, the customer will need to pay a remote handling cost or change shipping method. Please leave a message if you have any special requirements.
YANWEN Express: 7-12 working days for delivery. No tax or remote delivery cost for European Countries.
EMS: 9-12 working days for delivery. To Russian only sent by EMS. For some remote areas, if you do not want to pay a remote fee, we can send it to you by EMS too.
Aramex: 9-12 working day. To most middle east countries. If you do not like this shipping method, please leave a message on your order.
Attention:If you need YANWEN express shipping or other shipping methods like UPS, TNT, FedEx and so on, or you have special needs for your order, such as a declared name and so on, please leave a message on the order to notify us. Otherwise we will send the order as our usual practice.
As different countries have different import policies, sometimes we will change the shipping method based on the counties and goods.
When you receive the parcel, before you sign for acceptance, please check the package first to make sure the product is correct and undamaged.
After Sale Service:
If you have any problems, please do not hesitate to contact us. Please give us your detailed description, or error photo. We will provide the solution or solve it for you by teamviewer. For some special function, you can take the photo or video and then send it to us to check whether you operate it rightly.
Contact information:Email: Sales@OBDSTARStore.com
Whatsapp:+86 187 5090 6153
If you need any after-sale technical support, please inquiry this Whatsapp account: +86 187 5090 6153
If you have any problems, please do not hesitate to contact us. If your shipping method is fast shipping, please kindly give us your phone number for shipping.