OBDSTAR P003+ Kit works together with OBDSTAR DC706 series, supports the following models require a higher frequency clock during the decryption process(ME9.0, MED9.1, MED9.6.1, ME9.6.1, MED9.5.10, EDC16C39, EDC16CP35, EDC16C8).
This is a complete kit of optional adapters for OBDSTAR MS80/ Motomaster to work with MV AGUSTA, KAWASAKI, LIFAN/SUZUKI, AEON/BENELLI/BENELLI DSK,BENELLI/BENELLI DSK, SYM, PGO, HARTFORD, SHINERAY, BENELLI-ABS, VESPA and ROYAL ENFIELD.
Comes with a resistor board with 1KΩ resistor, 120Ω resistor, 100Ω resistor, 5.8KΩ resistor.
OBDSTAR DC706/ X300 Classic G3 needs to add 120ohm resistor when clone some ECUs, with this adapter, you don't need to buy additional resistors or disassemble them.
1. This is a set of motorcycle adapters for OBDSTAR MS50 basic version upgrade to standard version.
2. Upgrade service for OBDSTAR MS50 basic version upgrade to standard version.
With this OBDSTAR airbag reset kit, OBDSTAR Odo master full version can support airbag reset function, which covers 93 brands and over 13700 ECU part No. and some MCU.
Support battery reset for Audi and Volvo by BENCH.
Support VW IMMO IV NEC24C64 & NEC24C32 AKL Read IMMO data by BENCH
Work with X300 Classic G3, X300 DP PLUS, and X300 PRO4.
OBDSTAR EEPROM Adapter For X-100 PRO X100 PRO Auto Key Programmer support EEPROM Chip reading and adding more functions for X-100 PRO.
This is a full sets of OBDSTAR motorcycle adapters for OBDSTAR X300 DP Plus/ X300 DP/ X300 PRO4 to work on Motorcycles and car's IMMO system.
It supports HARLEY-DAVIDSON, DUCATI, KAWASAKI, HONDA, YAMAHA, SUZUKI, APRILIA/GILERA/PEUGEOT/PIAAGIO/VESPA, BMW and BRP motorcycles and TOYOTA, FORD, NISSAN cars.
OBDSTAR Converter for Renault KOLEOS/ CAPTUR/ Talisman/ Megane IV/ Scenic IV/ Espace V/ JLR/ FIAT Used with P001 Adapter
OBDSTAR RT 100 Remote Tester Frequency Infrared (IR) can detect frequency of car remote control and the infrared is working or not, which helps a lot in key programming and car maintenance.
Godiag full protocol OBD2 jumper used with OBDSTAR P50/ X300 DP PLUS Full Version/ Odo Master Full Version for airbag reset, which is a perfect replace of OBDSTAR P004 airbag reset kit P004 adapter + P004 jumper.
Used with OBDSTAR DC706 ECU Tool, X300 Classic G3.
Used for transmission ECU cloning, read/write MAP, diagnosis, mileage calibration and other functions, support Volkswagen, Mercedes-Benz, BMW, Porsche and many other brands, can be directly operated by OBD or by BENCH, no jumper connection required, convenient and fast.
TCM-001,TCM-002,TCM-003,TCM-004,TCM-005,TCM-006 TCM-008,TCM-009,TCM-010,TCM-011,TCM-012,TCM-013,TCM-017,TCM-018,TCM-019,TCM-020,TCM-021,TCM-022,TCM-023,TCM-024,TCM-025,TCM-026,TCM-027,TCM-029
With this license and cable, you can adjust BRP or Ducati mileage directly via OBD.
RH850/V850 adapter full kit is for airbag reset, immo data/pincode read (Dashboard, BCM, ELV, etc.).
Works with X300 Classic G3.
All data read is unencrypted, can be used on third party devices!
Works with X300 Classic G3/ DC706/ P50/ X300 PRO4
Supports VAG MQB 5A key programming;
Supports Ford/Lincoln 2021- BCM RH850 key programming (including all keys lost);
Supports Nissan 2021-/ Renault 2019- HFM RH850 key programming (including all keys lost);
Airbag Reset
Multifunctional Jumper for OBDSTAR X300 DP Plus/X300 Pro4/X300 DP Key Master
If your original OBDSTAR OBD2 16 PIN connector is lost or damaged, you could order this high-quality connector made by OBDSTAR company.
OBDSTAR Mercury Cables M063 M064 M072 M078 M002D
OBDSTAR M041 cable used for 2019 and up Ducati/ Harley Davison/ KTM motocycles.
If your original OBDSTAR Main Test Cable was lost or damaged, you could order this alone, which is made by OBDSTAR Company.